If your Samsung remote is not responding or has stopped working altogether, you may need to open it up to troubleshoot the issue. Opening a Samsung remote is a relatively simple process, but it is important to follow the steps carefully to avoid damaging the remote. In this article, we will provide you with step-by-step instructions on how to open a Samsung remote, as well as tips on how to troubleshoot common problems.
First, you will need to gather the necessary tools. You will need a small Phillips head screwdriver and a pair of tweezers. Once you have your tools, you can begin the process of opening the remote. Start by removing the battery cover on the back of the remote. Once the battery cover is removed, you will see two screws holding the remote together. Use the Phillips head screwdriver to remove the screws. Once the screws are removed, you can gently pry the two halves of the remote apart. Be careful not to damage the remote’s circuit board when you are prying it open.
Locate the Battery Compartment
Identifying the battery compartment on your Samsung remote is crucial for performing battery replacements. Here’s a comprehensive guide to help you locate it seamlessly:
- Inspect the back of the remote for a small, rectangular panel or a designated battery door. This panel is typically located at the bottom or top of the remote.
- If you can’t locate a visible panel, check for any subtle indentations or grooves on the remote’s surface. These indentations often indicate a removable battery compartment.
- If you encounter a remote with a non-removable battery compartment, it usually indicates that the battery is built-in and not user-replaceable. In such cases, you may need to contact a professional for battery replacement.
To ensure you proceed with the correct steps, refer to the table below for specific instructions based on your Samsung remote model:
| Remote Model | Battery Compartment Location |
|---|---|
| BN59-01259D | Bottom panel |
| BN59-01312A | Back panel, top right corner |
| BN59-01312B | Back panel, below volume buttons |
| BN59-01312D | Back panel, near the power button |
Insert the Batteries Correctly
The Samsung Remote requires two AA batteries to operate. To insert the batteries correctly, follow these steps:
1. Locate the battery compartment.
The battery compartment is typically located on the back of the remote. Look for a small door with a latch or release button.
2. Open the battery compartment.
Press or slide the latch or release button to open the battery compartment. The door will swing open, revealing the battery contacts.
3. Insert the batteries.
Take the two AA batteries and insert them into the battery compartment. The positive terminals of the batteries should be facing towards the springs, and the negative terminals towards the metal contacts.
| Incorrect Battery Insertion | Correct Battery Insertion |
|---|---|
 |
 |
Once the batteries are inserted, close the battery compartment door and make sure it clicks into place.
Reset the Remote Control
If your Samsung remote is not working properly, you may need to reset it. Here are the steps on how to reset the remote control:
- Remove the batteries from the remote.
- Press and hold the power button on the remote for 10 seconds.
- Reinsert the batteries into the remote.
- Point the remote at the TV and press the power button. The remote should now be reset and working properly.
Additional Tips
If you are still having trouble with your Samsung remote, you can try the following additional tips:
- Make sure that the batteries are fresh and properly inserted.
- Check that the remote is not blocked by any objects.
- Try using the remote from a different angle.
- If you have tried all of the above steps and your remote is still not working, you may need to contact Samsung customer support.
| Button | Function |
|---|---|
| Power | Turns the TV on or off. |
| Channel Up/Down | Changes the channel. |
| Volume Up/Down | Adjusts the volume. |
| Mute | Mutes the sound. |
| Source | Changes the input source. |
| Smart Hub | Opens the Smart Hub. |
| Guide | Opens the TV guide. |
| Info | Displays information about the current program. |
| Exit | Exits the current menu or app. |
Replace the Batteries
If your Samsung TV remote is experiencing battery issues, the first step is to check and replace the batteries. Use fresh, high-quality batteries that are compatible with your remote. Incorrect battery sizes or low-quality batteries can cause performance problems.
Clean the Battery Compartment
Over time, dirt and debris can accumulate in the battery compartment, interfering with battery contact. Use a soft cloth or cotton swab dipped in rubbing alcohol to gently clean the compartment and the battery terminals. Allow the compartment to dry thoroughly before inserting new batteries.
Inspect the Battery Contacts
Examine the battery contacts on both the remote and the battery compartment. Look for signs of corrosion, damage, or loose connections. Clean the contacts with a cotton swab and rubbing alcohol if necessary. Ensure the batteries are firmly seated and making proper contact with the terminals.
Troubleshoot Circuit Board Issues
If the above steps do not resolve the battery issues, the problem may lie with the remote’s circuit board. Inspect the board for any visible damage, such as broken or cracked components. If you have experience with electronics repair, you can attempt to solder any loose connections or replace faulty components. However, it is generally recommended to seek professional assistance for circuit board repairs.
Consider a Remote Reset
Occasionally, a simple reset can resolve battery issues. To reset your Samsung TV remote, remove the batteries, press and hold the power button for 10 seconds, and then reinsert the batteries. This process may clear any software glitches that can interfere with battery performance.
Contact Samsung Support
If all else fails, contact Samsung Support for further assistance. They may be able to diagnose the issue and provide a solution or repair service.
Check for Physical Damage
Thoroughly inspect the remote for any signs of physical damage. Here’s a detailed checklist to guide your examination:
1. Casing:
Check if the remote’s casing exhibits any cracks, dents, or other deformations that may have affected its integrity.
2. Buttons:
Scrutinize each button for responsiveness. Press and release them to ensure they actuate smoothly and don’t get stuck. Check for any loose or detached buttons.
3. Battery Compartment:
Open the battery compartment and inspect the contacts for corrosion, dirt, or damage. Clean the contacts with a cotton swab if necessary.
4. Infrared Emitter:
Examine the infrared emitter, which is usually located at the front of the remote. Ensure that it’s clean and free of obstructions.
5. Circuit Board:
If you feel comfortable, unscrew and open the remote to access the circuit board. Carefully inspect it for any burn marks, loose connections, or damaged components.
6. Sensors:
If your Samsung remote has motion or voice control features, check the corresponding sensors. Ensure they’re clean and unobstructed.
7. Signal Interference:
Although not a physical damage, signal interference can disrupt the remote’s functionality. Try using the remote in different locations to rule out potential sources of interference, such as electronic devices or fluorescent lighting.
Examine the Infrared Transmitter
Locate the infrared (IR) transmitter on the bottom edge of the remote. It is a small, black or red lens near the front of the remote. The IR transmitter emits invisible light that interacts with the sensors on the device or appliance you want to control.
How Infrared Light Works
IR light is a type of electromagnetic radiation that is located just below the visible light spectrum. It is not visible to the human eye, but it can be detected by electronic devices like TVs, DVD players, and air conditioners. When you press a button on the remote, the IR transmitter sends out a specific pattern of IR light that corresponds to the command you want to execute. The device or appliance’s IR receiver detects this pattern and responds accordingly.
Tips for Troubleshooting IR Transmitter Issues
| Problem | Solution |
|---|---|
| Remote does not work | – Check if the IR transmitter is aligned with the IR receiver on the device. – Replace the batteries in the remote. – Clean the IR transmitter and IR receiver with a soft cloth. |
| Remote has limited range | – Move the remote closer to the device. – Check if there are any objects blocking the line of sight between the remote and the device. |
| Remote works intermittently | – Replace the batteries in the remote. – Clean the IR transmitter and IR receiver with a soft cloth. – Check if there is any interference from other electronic devices. |
Replacement Remote Options
Universal Remotes
Universal remotes are designed to work with multiple devices, including Samsung TVs. They offer a convenient way to control your TV, DVD player, and other devices without having to use multiple remotes. However, universal remotes may not have all the same features as a Samsung remote.
Original Samsung Remotes
Original Samsung remotes are the best replacement option for your Samsung TV. They are guaranteed to be compatible and will have all the same features as your original remote. However, original Samsung remotes can be expensive.
Third-Party Remotes
Third-party remotes are made by companies other than Samsung. They are typically less expensive than original Samsung remotes, but they may not be as well-made or have all the same features. Additionally, third-party remotes may not be compatible with all Samsung TVs.
Features to Consider When Choosing a Replacement Remote
- Compatibility: Make sure the remote is compatible with your Samsung TV.
- Features: Consider the features you need, such as volume control, channel navigation, and app access.
- Range: Consider the range of the remote. Some remotes have a limited range, while others can be used from across the room.
- Ergonomics: The remote should be comfortable to hold and use.
- Price: Remotes can range in price from a few dollars to over $100. Consider your budget when making a decision.
Comparison of Replacement Remote Options
| Option | Compatibility | Features | Range | Ergonomics | Price |
|---|---|---|---|---|---|
| Universal Remote | Good | Limited | Short | Good | Low |
| Original Samsung Remote | Excellent | Complete | Long | Excellent | High |
| Third-Party Remote | Fair | Good | Medium | Fair | Medium |
Contact Samsung Support
If you’ve tried all the troubleshooting steps above and your Samsung remote is still not working, you can contact Samsung Support for further assistance.
Here are the steps on how to contact Samsung Support:
- Go to the official Samsung Support website: https://www.samsung.com/us/support/
- Select your product category: TV & Home Theater
- Select your product type: Remote Control
- Click on the “Contact Us” tab
- Choose your preferred contact method: phone, email, or chat
- Provide your contact information and a brief description of the issue you’re experiencing
- Submit your request
A Samsung Support representative will get back to you as soon as possible to help you troubleshoot the issue and resolve it.
| Contact Method | Availability | Estimated Response Time |
|---|---|---|
| Phone | 24/7 | 5-10 minutes |
| 24/7 | 1-2 business days | |
| Chat | 8am-12am EST | 5-10 minutes |
How To Open Samsung Remote
To open a Samsung remote, you will need to locate the small release button on the back of the remote. This button is usually located near the top or bottom of the remote, and it may be recessed into the plastic. Use a small tool, such as a paperclip or a pen, to press and hold the release button while you slide the back cover off the remote.
Once the back cover is off, you will have access to the batteries and the internal components of the remote. If you need to replace the batteries, simply remove the old batteries and insert the new batteries in the correct polarity.
If you need to repair the remote, you will need to identify the problem and then replace the faulty component. You can find replacement parts for Samsung remotes online or at a local electronics store.
People Also Ask About How To Open Samsung Remote
How do I replace the batteries in my Samsung remote?
To replace the batteries in your Samsung remote, follow these steps:
- Open the remote by pressing and holding the release button on the back of the remote.
- Slide the back cover off the remote.
- Remove the old batteries from the remote.
- Insert the new batteries into the remote in the correct polarity.
- Slide the back cover back onto the remote.
How do I repair my Samsung remote?
To repair your Samsung remote, follow these steps:
- Identify the problem with the remote.
- Purchase the necessary replacement parts.
- Open the remote by pressing and holding the release button on the back of the remote.
- Slide the back cover off the remote.
- Replace the faulty component.
- Slide the back cover back onto the remote.
