If you’re looking to bypass the Google account factory reset on your Motorola device, you’re in the right place. This can be a tricky process, but it’s definitely possible with the right instructions. In this article, we’ll walk you through the steps on how to do it. Before we start, it’s important to note that this process will only work on devices running Android 9 and below. If your device is running Android 10 or higher, you will not be able to bypass the Google account factory reset.
First, you’ll need to power off your Motorola device. Once it’s off, press and hold the volume down and power buttons simultaneously. Continue holding the buttons until the bootloader menu appears on the screen. Once the bootloader menu appears, use the volume down button to navigate to the “Recovery mode” option. Then, press the power button to select it. Your device will now reboot into recovery mode.
In recovery mode, use the volume down button to navigate to the “Wipe data/factory reset” option. Then, press the power button to select it. On the next screen, use the volume down button to navigate to the “Yes — delete all user data” option. Then, press the power button to select it. Your device will now begin wiping all of the data on it. Once the process is complete, your device will reboot into the setup wizard. You can now set up your device as if it were new.
Understanding Factory Reset Protection (FRP) on Motorola Devices
What is FRP?
Factory Reset Protection (FRP) is a security measure implemented by Google on Android devices. It prevents unauthorized individuals from wiping and resetting a device without the knowledge of the original owner.FRP is activated when a Google account is added to the device, and it can be quite a headache if you forget your password or if you buy a used device that has FRP enabled.
How does FRP work?
When a device is factory reset, the FRP system checks to see if a Google account was previously associated with the device. If a Google account is detected, the user will be prompted to enter the associated password before the factory reset process can be completed. This ensures that only the authorized user can reset the device, preventing unauthorized access to the device’s data and settings.
What are the implications of FRP?
1. Forgetting your Google account password or not knowing the password of the previously logged-in account can make it extremely difficult to reset your device, especially if you’re in a hurry or if you don’t have access to your Google account.
2. Buying a used device with FRP enabled can be frustrating if you’re unaware of the previous owner’s Google account credentials.
3. If the device is stolen, FRP can be a deterrent to thieves, as they will be unable to bypass the FRP lock without the correct Google account information
| FRP Status | Device Access |
|---|---|
| FRP Enabled | Requires Google Account Password |
| FRP Disabled | No Google Account Password Required |
Preparing Your Motorola Device for FRP Bypass
Before you attempt to bypass the Google Account Factory Reset Protection (FRP) on your Motorola device, it’s crucial to prepare your device accordingly. Here’s a comprehensive guide to help you through the process:
Step 1: Ensure Network Connectivity
Connect your Motorola device to a stable Wi-Fi or cellular data network. This ensures that the device can communicate with Google’s servers during the FRP bypass process.
Step 2: Enable USB Debugging and OEM Unlocking
Enable USB Debugging and OEM Unlocking in your device’s Developer Options. To do this:
| Steps | Description |
|---|---|
| Go to Settings | Choose About Phone |
| Tap on Build Number multiple times | Developer Options should be unlocked |
| Go to Developer Options | Enable USB Debugging and OEM Unlocking |
Step 3: Disable Automatic System Updates
Disable automatic system updates to prevent your device from being updated to a newer version of Android that may have a patched FRP bypass method. To disable automatic system updates:
- Go to Settings
- Choose System
- Select System Updates
- Toggle off Automatic System Updates
Using the ADB Command Method to Disable FRP
Step 1: Prerequisites
To utilize this method, you’ll need:
- A PC or laptop with ADB drivers installed
- A USB cable to connect your Motorola device
- A Motorola device with Factory Reset Protection (FRP) enabled
Step 2: Enable USB Debugging
If USB Debugging is not already enabled on your Motorola device, follow these steps:
- Navigate to “Settings” > “About Phone”.
- Tap “Build number” seven times to enable Developer options.
- Return to “Settings” > “Developer options” and enable “USB Debugging”.
Step 3: Execute ADB Commands
Connect your Motorola device to your PC or laptop using a USB cable. Open a command prompt or terminal window and navigate to the ADB installation directory. Depending on your operating system, you may need to grant ADB authorization on your device.
Once ADB is authorized, enter the following commands in sequence:
| Command | Description |
|---|---|
adb reboot recovery |
Reboot the device into recovery mode |
adb shell |
Enter the ADB shell |
cd /data/data/com.google.android.gsf |
Navigate to the Google Play Services folder |
ls |
List files and folders in the current directory |
rm -r * |
Delete all files and folders in this directory |
adb reboot |
Reboot the device |
Once the device reboots, Factory Reset Protection (FRP) will be disabled, and you can proceed with the factory reset process.
Utilizing the Emergency Call Method for FRP Bypass
This method utilizes the emergency call feature on your Motorola device to bypass Google account verification. Follow these steps carefully:
- Turn on your Motorola device and begin the setup process. When prompted to enter your Google account details, select “Emergency call”.
- Dial the emergency number “911” or any other emergency number specific to your country. Once connected, immediately hang up the call.
- From the emergency dial pad, tap on the “Back” button and you will be redirected to the previous setup screen.
- Repeat steps 3 to 5 until you gain access to your device’s settings or other applications.
Step Action 1 Tap on the “Back” button several times to return to the setup screen. 2 Tap on “Settings” or any other visible app icon. 3 Navigate to the “Wi-Fi” settings and connect to an available network. 4 Use the connected Wi-Fi network to download and install an FRP bypass APK file or access a bypass service. Once you have bypassed the FRP lock, you can complete the setup process and use your Motorola device without any Google account restrictions.
Resetting FRP from Recovery Mode (for Moto G Power)
Requirements:
– Computer with Windows OS
– USB Cable
– Motorola Flash Tool
– Motorola USB Driver
– Stock Firmware with .zip format for your deviceInstructions:
1. Download and install Motorola Flash Tool and Motorola USB Driver.
2. Unzip the stock firmware file to a folder on your computer.
3. Extract the contents of the Motorola Flash Tool archive to a folder on your computer.
4. Disable Windows driver signature enforcement.
5. Enter Rescue and Smart Assistant (RSA) mode on your device:- Turn off your phone.
- Press and hold the Volume Down button.
- While holding the Volume Down button, connect your phone to the computer using a USB cable.
- Release the Volume Down button when you see the Rescue and Smart Assistant screen.
Note:
– Make sure you have a backup of your personal data before proceeding.
– The FRP bypass process may vary slightly depending on the specific Moto G Power model.Bypassing FRP Using a Custom BootROM
1. Prerequisites
- A Motorola device running on Android 7.0 or later
- A computer with a USB cable
- ADB and Fastboot tools installed
2. Setting Up ADB and Fastboot
- Enable USB debugging on your device
- Connect your device to your computer via USB cable
- Open a command prompt or terminal window and type "adb devices" to verify connection
3. Downloading Custom BootROM
- Search for a custom BootROM compatible with your Motorola device
- Download the BootROM file as a .img extension
4. Flashing Custom BootROM
- Boot your device into fastboot mode: Turn off the device, then press and hold the Volume Down and Power buttons simultaneously
- In the command prompt, type "fastboot oem unlock" and press Enter
- Type "fastboot flash boot [BootROM file name].img" and press Enter
5. Installing Custom Recovery
- Download the appropriate custom recovery for your device
- Copy the recovery file to your device’s SD card
- Reboot your device into recovery mode by pressing and holding the Volume Up and Power buttons simultaneously
6. Installing a Custom ROM or Stock Firmware
- Installing Custom ROM:
- Boot into recovery mode and choose "Install from SD card"
- Select the custom ROM file and follow the on-screen instructions
- Installing Stock Firmware:
- Download the factory image for your device from Motorola’s website
- Extract the Boot.img and System.img files from the factory image
- Flash the extracted Boot.img file using Fastboot as in step 4
- Flash the extracted System.img file using ADB by typing "adb sideload System.img"
Disabling FRP via Third-Party Application
If the above methods prove unsuccessful, you can utilize third-party applications such as D&G unlocker, FRP Bypass, or UnlockJunky to bypass FRP. These apps require a stable internet connection and may involve downloading and installing custom recovery tools. Here’s a detailed guide on using one of these applications:
Step 1: Download and Install Third-Party App
Locate and download D&G Unlocker, FRP Bypass, or UnlockJunky from a trusted source. Install the application on your computer or laptop.
Step 2: Connect Device to Computer
Using a USB cable, connect your Motorola device to your computer and make sure it’s turned on.
Step 3: Launch App and Enable ADB
Launch the third-party app on your computer and activate the USB Debugging Mode on your device by navigating to Settings > Developer Options > USB Debugging.
Step 4: Enable Fastboot Mode
Turn off your device, wait a few seconds, and then reboot it while simultaneously pressing and holding the Volume Down and Power buttons until you see the Fastboot Mode screen.
Step 5: Use Command Window
Open a Command Window or Terminal on your computer and navigate to the directory where you installed the third-party app. For example, if you installed D&G Unlocker, type “cd C:\D&GUnlocker” (without quotes) into the Command Window.
Step 6: Run Bypass Command
Depending on the third-party app you’re using, you’ll need to run a specific command to bypass FRP. Refer to the app’s instructions for the exact command. For example, in D&G Unlocker, type “adb devices” to confirm the device is connected, then “adb shell content insert –uri content://settings/secure –bind name:s:user_setup_complete –value 1” to bypass FRP.
Step 7: Reboot and Reset Device
Once the bypass process is complete, type “adb reboot” to restart your device. You can now reset it to factory settings by navigating to Settings > System > Reset options > Erase all data (factory reset).
Third-Party App Command D&G Unlocker adb shell content insert –uri content://settings/secure –bind name:s:user_setup_complete –value 1 FRP Bypass adb shell settings put global user_setup_complete 1 UnlockJunky adb shell rm /data/data/com.google.android.gsf/databases/gservices.db Factory Reset Without Google Account Using Google Account Manager
If you don’t have access to your Google account, you can still factory reset your Motorola device using Google Account Manager. To do this, you will need a computer and a USB cable.
Step 1: Download Google Account Manager
Download Google Account Manager from the official website and install it on your computer.
Step 2: Enable USB Debugging
On your Motorola device, go to “Settings” > “About Phone” and tap “Build Number” 7 times. This will enable Developer Options.
Step 3: Connect Your Device
Connect your Motorola device to your computer using a USB cable.
Step 4: Launch Google Account Manager
Open Google Account Manager on your computer and select “Bypass FRP.”
Step 5: Select Your Device
Select your Motorola device from the list of detected devices.
Step 6: Sign In with a Google Account
Enter the username and password of any Google account you know.
Step 7: Reset Your Device
Once you have signed in, Google Account Manager will bypass the FRP lock and factory reset your device.
Step 8: Additional Information
Note You can also use Google Account Manager to remove the FRP lock from other Android devices, including Samsung, LG, and Huawei. If you don’t have access to a computer, you can also try using the “ADB Command” method to bypass the FRP lock. For more detailed instructions, you can refer to the official Google Account Manager documentation. Utilizing the Motorola Reset Tool for FRP Bypass
For the Motorola Reset Tool method, follow these detailed steps:
1. Download the Motorola Reset Tool from a reputable source.
2. Extract the downloaded ZIP file and launch the Motorola Reset Tool executable.
3. Connect your Motorola device to the computer via USB cable in fastboot mode.
4. Enter the following command in the Motorola Reset Tool window: fastboot oem unlock
5. Press enter and wait for the unlock process to complete.
6. Reboot your device into recovery mode by pressing the appropriate key combination (refer to your device manual).
7. Navigate to the “Factory Reset” option and select it.
8. Wait for the reset process to finish and your device will be FRP bypassed.
9. After successfully unlocking, reboot the device into recovery mode again and navigate to the “Advanced” option. From there, select “Wipe Dalvik Cache” and “Reboot to System.” This additional step ensures a complete reset and prevents any potential residual data issues.Note: Before proceeding, ensure that your Motorola device has adequate battery power and is connected securely to the computer.
| Motorola Device Model | Fastboot Unlock Command |
| ———– | ———– |
| Moto G6 Play | fastboot oem unlock G6Play |
| Moto E5 Plus | fastboot oem unlock E5Plus |
| Moto Z3 Play | fastboot oem unlock Z3Play |
| Moto One Power | fastboot oem unlock OnePower |
| Moto G7 Power | fastboot oem unlock G7Power |Alternative Methods
**Using ADB:** If you have previously enabled USB debugging on your Motorola device, you can use the Android Debug Bridge (ADB) to bypass the Google account verification. Connect your device to your computer, open a command prompt or terminal, and enter the following commands:
adb shell cd /data/data/com.google.android.gsf/databases sqlite3 accounts.dbFrom here, you can execute SQL commands to delete the Google account information from the database. However, this method is only feasible if you have already enabled USB debugging.
**Using a Custom Recovery:** If your Motorola device allows you to install a custom recovery, such as TWRP, you can use it to bypass the Google account verification. Boot your device into recovery mode, navigate to the “Wipe” menu, and select “Advanced Wipe.” Choose “Dalvik/ART Cache, Data, and Cache” to wipe all user data, including the Google account information.
**Using a Factory Image:** Download the factory image for your specific Motorola device from the official website. Use a tool like Flashtool or Odin to flash the factory image onto your device. This will overwrite all data on your device, including the Google account information.
Considerations
**Risks:** Bypassing Google account verification can be risky. It can void your device’s warranty, compromise your data security, and prevent you from accessing certain features that require a Google account.
**Legal Implications:** In some regions, bypassing Google account verification may be illegal. It is important to check the laws in your area before attempting to do so.
**Compatibility:** The methods described above may not be applicable to all Motorola devices or all versions of Android. It is recommended to research the specific model and software version of your device before proceeding.
**Time and Effort:** Bypassing Google account verification can be a time-consuming and technically challenging process. It is important to carefully follow the instructions and be prepared for potential complications.
How To Bypass Google Account Factory Reset On A Motorola
If you’ve forgotten your Google account password or if your device has been stolen, you may need to bypass the Google account factory reset protection in order to regain access to your device. Here are the steps on how to do it:
1. Turn off your Motorola device.
2. Press and hold the Volume Down and Power buttons simultaneously.
3. When the Motorola logo appears, release the Power button but continue holding the Volume Down button.
4. Use the Volume Down button to navigate to the “Recovery mode” option and press the Power button to select it.
5. Use the Volume Down button to navigate to the “Wipe data/factory reset” option and press the Power button to select it.
6. Use the Volume Down button to navigate to the “Factory data reset” option and press the Power button to select it.
7. Your Motorola device will now perform a factory reset. Once the reset is complete, you will be able to set up your device without having to enter a Google account password.
People Also Ask
How can I bypass Google account verification on my Motorola device?
There are several ways to bypass Google account verification on your Motorola device. One way is to use the Forgot Password option on the login screen. Another way is to use a third-party tool, such as FRP Bypass APK.
How can I remove a Google account from my Motorola device?
To remove a Google account from your Motorola device, go to Settings > Accounts > Google. Tap on the account you want to remove and then tap on the Remove account button.
How can I reset my Motorola device to factory settings?
To reset your Motorola device to factory settings, go to Settings > System > Reset options > Factory data reset. Tap on the Reset phone button and then tap on the Erase everything button.
