This Portable Two-Post Carport features a durable powder-coated steel frame and rust-resistant galvanized steel roof panels. With its durable construction, this carport provides reliable protection for your vehicles from the elements. It features a spacious 12-foot width and 20-foot length, offering ample room for parking two cars or storing other equipment.
The assembly process for the Arrow 12 Foot by 20 CPHC122009 Portable Two-Post Carport is relatively straightforward and can be completed with the help of one or two assistants. Before beginning, ensure you have all the necessary tools, including a drill, wrench, and level. Additionally, read through the instruction manual carefully to familiarize yourself with the steps involved.
The first step involves preparing the site by clearing the ground and leveling the area where the carport will be installed. Next, assemble the base frame by connecting the four legs using the provided bolts and nuts. Once the base frame is complete, attach the legs to the carport’s roof panels using the included U-bolts. Finally, secure the roof panels to the frame using the self-tapping screws.
Selecting The Right Location
Choosing the ideal location for your Arrow 12 Foot by 20 CPHC122009 shed is crucial for both its functionality and longevity. Here are some key factors to consider when selecting the perfect spot:
Size and Shape of the Land: Ensure that the designated area is sufficiently large to accommodate the shed’s footprint and provide adequate clearance for access and maintenance. Consider the shape of the land as well, ensuring it allows for a seamless installation without any obstructions.
Slope and Drainage: Avoid areas with significant slopes that could compromise the shed’s stability. Opt for a location with proper drainage to prevent water accumulation and potential damage to the structure. If necessary, install a drainage system to channel water away from the shed.
Soil Conditions: The soil type and its bearing capacity are vital factors to consider. Soft or sandy soil may require additional support, such as a concrete slab or gravel base, to ensure the shed remains stable and secure over time.
Accessibility: Plan the placement of the shed to ensure easy access for vehicles, equipment, and materials. Consider the width of the driveway or access road and any potential obstacles, such as trees or other structures.
Proximity to Utilities: If you plan to install electricity or water to the shed, check the availability of nearby utilities. This will help minimize the cost and effort of extending these services to the shed’s location.
Preparing the Base
Before erecting the shed, it is crucial to prepare a stable and level base. Here are the detailed steps involved:
Choosing the Right Location
Select a well-drained and level area with adequate space around the shed for ventilation and access. Avoid placing the shed near trees or other potential obstacles that may hinder its construction or cause damage.
Building the Foundation
There are several options for the foundation, including a concrete slab, concrete blocks, or a gravel pad. Each method requires different materials and techniques, so it’s important to choose the best option based on your soil conditions and budget:
| Foundation Type | Materials Needed | Advantages | Disadvantages |
|---|---|---|---|
| Concrete Slab | Concrete mix, reinforcement bars, formwork | Most durable and stable, provides a level surface | Requires professional installation, expensive |
| Concrete Blocks | Concrete blocks, leveling sand | Sturdy and relatively easy to install, suitable for uneven ground | Can shift over time, not as durable as a concrete slab |
| Gravel Pad | Gravel, landscape fabric | Inexpensive, quick to install, drains well | Not as stable as concrete options, can deteriorate over time |
Leveling the Base
Once the foundation is in place, use a level to check its levelness. If necessary, adjust the foundation by adding or removing material until it is perfectly level. This step is crucial for ensuring the stability and longevity of the shed.
Installing the Uprights
1. Locate the uprights and align them with the designated positions in the base frame. Ensure that the uprights are oriented correctly, with the slotted end facing upwards and the holes on the sides aligned.
2. Insert the bolts through the matching holes on the base frame and uprights. Tighten the bolts securely using a wrench or socket set.
3. Stabilizing the Uprights:
To ensure stability and prevent sway, the uprights must be properly stabilized. Here are several approaches you can consider:
| Approach | Description |
|---|---|
| Cross Bracing | Install cross braces between the uprights at various heights to create a rigid frame. This helps resist lateral forces and minimizes movement. |
| Guy Wires | Attach guy wires from the top of the uprights to secure anchor points in the ground. This provides additional support against wind and other external forces. |
| Concrete Footings | Excavate holes at the base of the uprights and pour concrete to create a solid foundation. This provides excellent stability and prevents the uprights from shifting or sinking. |
Choose the stabilization method that best suits your specific site conditions and requirements. Ensure that the uprights are securely stabilized before proceeding with the assembly of the canopy.
Leveling and Plumb the Uprights
Method 1: Using a Level and Plumb Bob
- Place the level on the bottom rail of each upright and adjust the legs until the level indicates level.
- Suspend a plumb bob from the top corner of each upright and adjust the legs until the plumb bob is centered over the bottom corner.
Method 2: Using a Laser Level
- Set up a laser level on a tripod and adjust it to a vertical plane.
- Place the upright in the laser beam and adjust the legs until the beam is centered on the upright.
Method 3: Using a Transit or Builder’s Level
- Set up a transit or builder’s level on a tripod at a distance from the uprights.
- Sight the instrument on the bottom of each upright and adjust the legs until the crosshairs intersect the bottom corner.
- Repeat the process for the top of each upright, adjusting the legs until the crosshairs intersect the top corner.
| Method | Tools Required | Accuracy | Ease of Use |
|---|---|---|---|
| Level and Plumb Bob | Level, Plumb Bob | Good | Moderate |
| Laser Level | Laser Level, Tripod | Excellent | Easy |
| Transit or Builder’s Level | Transit or Builder’s Level, Tripod | Excellent | Moderate |
Attaching the Cross Bar
1. Locate the Cross Bar and U-Bolts
Identify the cross bar, which is the horizontal beam that connects the two uprights. Locate the four U-bolts (two per side) that will secure the cross bar to the uprights.
2. Align the Cross Bar
Position the cross bar between the uprights, ensuring that it is level and centered. Adjust the uprights as needed to achieve proper alignment.
3. Insert the U-Bolts
Slide the U-bolts through the holes in the uprights and the cross bar. Ensure that the threads on the U-bolts are facing outward.
4. Secure the Nuts
Tighten the nuts onto the U-bolts using a wrench. Apply even pressure to the nuts to ensure a secure hold.
**Tip:** Use locking nuts to prevent the bolts from loosening over time.
5. Inspect and Adjust
Once the cross bar is secured, step back and inspect its position. Ensure that it is level, centered, and firmly attached to the uprights. If necessary, make small adjustments to the U-bolts or uprights to achieve the desired alignment.
| Inspection Points | Adjustment Steps |
|---|---|
| Levelness | Adjust the bolts on the uprights |
| Centering | Realign the cross bar or adjust the uprights |
| Stability | Tighten or loosen the U-bolts if needed |
Complete the cross bar attachment by ensuring it is securely fastened and properly aligned, ensuring the stability and durability of the Arrow 12 Foot by 20 CPHC122009.
Securing the Back Brackets
The back brackets provide additional support to the greenhouse frame and ensure stability. Here’s how to secure them:
- Identify the four back brackets included in the kit.
- Locate the pre-drilled holes on the top and bottom ends of the greenhouse frame.
- Align the back brackets with the pre-drilled holes, ensuring they are facing outward.
- Insert the provided bolts through the holes and secure them with washers and nuts.
- Tighten the bolts securely, but avoid overtightening.
- Repeat the process for the remaining back brackets on the opposite side of the greenhouse.
Additional Tips:
- Use a power drill with a socket wrench attachment for efficiency.
- Check the tightness of the bolts periodically and re-tighten as necessary.
- Consider applying a sealant around the base of the back brackets to prevent water penetration.
Installing the Windshield
To install the windshield, start by aligning the outer lip of the windshield with the window opening. Once the windshield is aligned, insert the four screws into the holes provided. Make sure that the screws are tightened securely but do not overtighten as this can damage the windshield.
Next, apply a bead of clear silicone sealant around the perimeter of the windshield. The silicone sealant will help to seal the windshield and prevent leaks. Once the silicone sealant has dried, the windshield installation is complete.
Installing the Windshield Wiper Blades
To install the windshield wiper blades, remove the old wiper blades by lifting the release tab on the wiper arm and pulling the blade straight up.
Once the old wiper blades are removed, align the new wiper blades with the wiper arms and push them down until they snap into place. Make sure that the wiper blades are installed securely so that they will not come off while in use.
Installing the Windshield Washers
To install the windshield washers, start by identifying the location of the washer nozzles on the windshield. Once the nozzles have been located, remove the old nozzles by pulling them straight out of the windshield.
Next, insert the new washer nozzles into the holes in the windshield and push them until they snap into place. Make sure that the washer nozzles are installed securely so that they will not leak.
Installing the Windshield Garnish
To install the windshield garnish, start by cleaning the area around the windshield where the garnish will be installed. Once the area is clean, apply a bead of clear silicone sealant around the perimeter of the windshield. The silicone sealant will help to seal the garnish and prevent leaks.
Next, align the garnish with the windshield and press it into place. Make sure that the garnish is installed securely so that it will not come off while in use.
Installing the Windshield Moulding
To install the windshield moulding, start by cleaning the area around the windshield where the moulding will be installed. Once the area is clean, apply a bead of clear silicone sealant around the perimeter of the windshield. The silicone sealant will help to seal the moulding and prevent leaks.
Next, align the moulding with the windshield and press it into place. Make sure that the moulding is installed securely so that it will not come off while in use.
| Part | Quantity |
|---|---|
| Windshield | 1 |
| Windshield Wiper Blades | 2 |
| Windshield Washers | 2 |
| Windshield Garnish | 1 |
| Windshield Moulding | 1 |
Finishing Touches
8. Inspection and Maintenance
1. Once the structure is complete, it is essential to inspect all components thoroughly. Check for any loose connections, damaged parts, or imperfections that may affect the stability and safety of the structure.
2. Regularly inspect the structure for signs of wear and tear, rust, or other potential issues. Conduct annual maintenance to ensure the structure remains in optimal condition.
3. Regularly lubricate all moving parts, such as hinges and rollers, to ensure smooth operation and prevent premature wear.
4. Clean the structure periodically to remove dirt, debris, or other accumulations that may affect its appearance or performance.
5. If any damage or issues are identified during inspection, make prompt repairs or replacements to maintain the integrity of the structure.
6. Follow the manufacturer’s recommendations for ongoing maintenance and care to prolong the lifespan and functionality of the structure.
7. Consider setting up a routine maintenance schedule to ensure regular inspections and upkeep.
8. To simplify maintenance tasks, it is recommended to keep a record of all maintenance activities, including dates, inspections performed, and any repairs or replacements made. This will provide a comprehensive history of the structure’s care and facilitate ongoing maintenance efforts.
| Maintenance Task | Frequency |
| Inspection | Annually |
| Lubrication | As needed |
| Cleaning | Periodically |
| Repairs | As needed |
Tips for Maintaining the Arrow
To ensure optimal performance and longevity of your Arrow 12 Foot By 20 Cphc122009, follow these maintenance tips:
1. Regular Cleaning
Keep the structure clean by removing dirt, debris, and bird droppings regularly. Use a mild detergent solution and a soft brush to avoid scratching the surface.
2. Lubrication
Periodically lubricate all moving parts, such as hinges, rollers, and pulleys, with a silicone-based lubricant. This will ensure smooth operation and prevent wear.
3. Paint touch-ups
Inspect the surface for any scratches or chipped paint. Touch up any damaged areas promptly to prevent corrosion.
4. Proper Storage
When not in use, store the Arrow in a dry, covered area to protect it from the elements.
5. Inspect for Damage
Regularly inspect the structure for any signs of damage, such as cracks, bends, or rust. Address any damage promptly to prevent further issues.
6. Tighten Bolts and Screws
Over time, bolts and screws may loosen. Regularly check and tighten them to ensure the structure’s stability.
7. Protect from Abrasion
Avoid dragging or rubbing the Arrow against surfaces that could scratch or damage the finish.
8. Protect from Harsh Conditions
In areas with extreme weather conditions, consider using protective covers to shield the Arrow from rain, snow, or extreme heat.
9. Inspect and Test Safety Features
Every 3 months, thoroughly inspect and test all safety features, including the following:
| Feature | Inspection | Test |
|---|---|---|
| Safety latch | Check for damage or wear | Engage and release multiple times |
| Safety bars | Inspect for cracks or bends | Open and close smoothly |
| Emergency exit | Ensure clear and accessible | Open and close without obstruction |
Safety Guidelines
1. Read Instructions Carefully
Thoroughly review the manufacturer’s instructions before beginning assembly. Ensure you understand each step and have the necessary tools and materials.
2. Wear Appropriate Gear
Wear safety glasses, gloves, and appropriate clothing during assembly to protect yourself from any potential hazards.
3. Clear the Assembly Area
Choose a level, stable surface for assembly. Clear the area of any obstructions or debris to prevent tripping or injury.
4. Recruit Assistance
Consider having an assistant during assembly for heavy lifting and support, especially when handling the large panels.
5. Secure the Base
Ensure the base is stable on the ground before attaching the panels. Use provided bolts or weights to secure it in place.
6. Use Proper Lifting Techniques
Bend your knees and lift with your legs when handling heavy panels. Avoid overexertion or straining your back.
7. Inspect Parts Regularly
Check the panels and hardware for any damage or defects before and during assembly. Replace any faulty parts to ensure the structure’s integrity.
8. Avoid Climbing
Do not attempt to climb or stand on the panels during assembly. This poses a safety risk and could cause damage to the structure.
9. Store Safely
When not in use, store the disassembled panels and hardware in a dry, secure location to prevent damage and deterioration.
10. Additional Safety Considerations
| Potential Hazard | Prevention |
|---|---|
| Wind | Anchor the structure securely, especially in windy conditions. |
| Uneven Ground | Level the ground before assembly and use stabilizing blocks if necessary. |
| Electrical Hazards | Avoid operating near electrical wires or equipment. |
| Sharp Edges | Wear gloves to handle metal components and carefully remove any burrs or sharp edges. |
| Falling Panels | Always keep an eye on the panels and never leave them unattended during assembly. |
How To Erect Arrow 12 Foot By 20 Cphc122009
To erect an Arrow 12 Foot by 20 Cphc122009, you will need the following materials:
- Arrow 12 Foot by 20 Cphc122009
- Screwdriver
- Drill
- Wrench
- Ladder
- Helper
Once you have all of your materials gathered, you can begin the assembly process.
- First, lay the Arrow 12 Foot by 20 Cphc122009 on the ground.
- Next, attach the legs to the frame using the bolts and nuts provided.
- Once the legs are attached, stand the Arrow 12 Foot by 20 Cphc122009 up in its desired location.
- Use the ladder to climb up to the top of the Arrow 12 Foot by 20 Cphc122009 and attach the roof panels.
- Finally, use the screwdriver to tighten all of the screws and bolts.
Your Arrow 12 Foot by 20 Cphc122009 is now assembled and ready to use!
