Encountering the dreaded “Bedrock No Multiplayer” issue can be frustrating, hindering your online gaming experience with friends. This error can stem from various causes, but fear not—there are actionable solutions to combat this obstacle and restore your multiplayer connectivity. In this comprehensive guide, we will delve into the intricacies of this issue, exploring potential causes and providing step-by-step instructions to resolve them effectively.
Before embarking on troubleshooting, it’s crucial to understand that this problem can manifest differently depending on your platform. For instance, if you’re facing difficulties joining a multiplayer world on a mobile device, the issue may lie with your device’s network settings or compatibility with the game’s version. On the other hand, if you’re unable to connect to a multiplayer server on a PC or console, the root cause could be related to your router’s configuration, firewall settings, or even your internet service provider.
To systematically address this issue, it’s advisable to begin by verifying your internet connection. Ensure that your device is connected to a stable Wi-Fi or mobile data network. If the connection appears stable, proceed to the next troubleshooting step, which involves checking your router’s settings. Verify that your router’s firmware is up-to-date and that port forwarding is enabled for the specific ports required by the game. Additionally, ensure that your firewall is not blocking the game’s multiplayer functionality.
Troubleshooting the Multiplayer Server
Step 1: Check Your Internet Connection
The most common cause of multiplayer issues in Bedrock Edition is a poor internet connection. Make sure your device is connected to a stable Wi-Fi network or has a strong cellular signal. Run a speed test to ensure you have sufficient bandwidth for online play. If your connection is weak, try moving closer to the router or switching to a wired connection.
Check your router’s settings to ensure it allows port forwarding for Minecraft: Bedrock Edition. The default ports for Minecraft multiplayer are TCP 19132 and UDP 19132-19133. Forward these ports to the device hosting your Minecraft server.
If you’re using a virtual private network (VPN), try disabling it while playing Minecraft multiplayer. VPNs can interfere with the game’s network functionality.
| Platform | TCP Port | UDP Ports |
|---|---|---|
| PC | 19132 | 19132-19133 |
| Xbox | 19132 | 19132-19133 |
| PlayStation | 19132 | 19132-19133 |
| Nintendo Switch | 19132 | 19132-19133 |
| Mobile | 19132 | 19132-19133 |
Verifying Game Files
Corrupted or missing game files can lead to various issues, including problems with multiplayer connectivity. Verifying your game files can identify and repair any damaged or missing components, potentially resolving the “No Multiplayer” issue.
Here’s a step-by-step guide on how to verify your game files:
- For Windows 10/11: Launch the Microsoft Store app and click on the three-dot menu in the top-right corner. Select “Downloads and Updates” and then find “Minecraft” in the list of games. Click on the “Verify” button.
- For Xbox consoles: Go to “My Games and Apps” on your console. Select “Minecraft” from the list of games and press the “Start” button. Choose “Manage game and add-ons” and navigate to the “Updates” tab. Click on “Check for updates” and follow the on-screen instructions to verify the installation.
- For other platforms: The process for verifying game files may vary depending on your platform. Consult the official support documentation or reach out to the developer of your Minecraft version for specific instructions.
| Platform | Verification Method |
|---|---|
| Windows 10/11 | Microsoft Store > Downloads and Updates > Verify |
| Xbox consoles | My Games and Apps > Minecraft > Manage game and add-ons > Updates > Check for updates |
After verifying your game files, launch Minecraft and try to establish a multiplayer connection again. If the issue persists, proceed to the next troubleshooting step.
Disabling Antivirus and Firewalls
Antivirus and firewall software can sometimes interfere with multiplayer functionality in Bedrock by blocking necessary ports or traffic. To resolve this issue, try temporarily disabling these programs while playing.
Here’s how to disable antivirus and firewall software in different operating systems:
Windows
| Antivirus | Disable Method |
|---|---|
| Windows Defender | Settings > Update & Security > Windows Security > Virus & threat protection > Manage settings > Toggle off “Real-time protection” |
| Norton | Right-click Norton icon in taskbar > “Disable Auto-Protect” for 15 minutes |
| McAfee | Settings menu > Real-Time Scanning > Toggle off “Enable Real-Time Scanning” |
| Firewall | Disable Method |
|---|---|
| Windows Firewall | Control Panel > System and Security > Windows Firewall > Click “Turn Windows Firewall on or off” > Toggle off “Enable Windows Firewall” for both public and private networks |
macOS
*
Antivirus: Open the antivirus software’s settings and locate the “Disable” or “Pause” option.
*
Firewall: Go to System Preferences > Security & Privacy > Firewall > Click “Turn Off Firewall”
Linux
*
Antivirus: Consult the documentation for your specific antivirus software.
*
Firewall: Different distributions have different firewalls. Use the command “sudo ufw disable” or refer to the specific firewall’s documentation.
Adjusting Network Settings
Troubleshooting Local Network Issues
If you’re experiencing multiplayer issues on a local network, try these steps:
- Ensure that all devices are connected to the same Wi-Fi network.
- Check if any firewalls or antivirus software are blocking Minecraft connections. Disable or configure them to allow multiplayer.
- Assign static IP addresses to all devices on the network to avoid connection conflicts.
- Restart both the router and the Minecraft game on all devices.
Port Forwarding
Port forwarding allows incoming connections to specific devices on your network. If you’re hosting a multiplayer server, you may need to configure port forwarding on your router.
To forward port 19132 (the default Minecraft port), follow these steps:
| Router Interface | Steps |
|---|---|
| 192.168.0.1 |
|
Checking NAT Type
NAT (Network Address Translation) determines how your network communicates with the internet. Different NAT types can affect multiplayer connectivity.
To check your NAT type in Minecraft:
- Start Minecraft and go to the “Multiplayer” menu.
- Click on “NAT Type” to display your current NAT type.
Ideally, you should have an “Open” NAT type, which allows for unhindered multiplayer connections.
Reinstalling Minecraft Bedrock Edition
Reinstalling Minecraft Bedrock Edition can often resolve issues with multiplayer functionality. Here’s a detailed guide on how to reinstall the game on different platforms:
Windows 10/11
- Open the Microsoft Store.
- Search for Minecraft Bedrock Edition.
- Click on the game and select Uninstall.
- After uninstalling, click Install to reinstall the game.
Xbox
- Navigate to My Games & Apps.
- Select Minecraft Bedrock Edition.
- Press the Menu button on your controller.
- Select Manage Game & Add-ons.
- Go to Saved Data and delete any corrupted saves that may be causing the issue.
IOS/Android
- Press and hold the Minecraft Bedrock Edition icon on your home screen.
- Select Uninstall or Remove App.
- Go to the App Store or Google Play Store.
- Search for Minecraft Bedrock Edition and reinstall the game.
Checking Internet Connectivity
Internet connectivity is crucial for online multiplayer functionality. Verify that your device has a stable internet connection by following these steps:
1. Check Your Wi-Fi Settings
Ensure that your device is connected to a reliable Wi-Fi network. Navigate to the network settings on your device and confirm that you are connected to the correct Wi-Fi network with a strong signal.
2. Run a Speed Test
Use an internet speed test tool to determine the speed and stability of your internet connection. Check if your download and upload speeds meet the minimum requirements for multiplayer gaming.
3. Restart Your Router
Sometimes, restarting your router can resolve connectivity issues. Unplug the router, wait a few moments, and then plug it back in. Allow some time for the router to restart and re-establish the connection.
4. Troubleshoot Your Network
Check your network cables or modem for loose connections or damage. If necessary, replace any faulty cables or contact your internet service provider for assistance.
5. Use Ethernet or Mobile Data
If possible, try connecting your device to the internet using an Ethernet cable. This provides a more stable connection than Wi-Fi. Alternatively, you can use mobile data on your device, but ensure that it has sufficient coverage and is not capped.
6. Advanced Troubleshooting
If the above steps do not resolve the issue, try the following advanced troubleshooting tips:
| Option | Description |
|---|---|
| Check Firewall and Antivirus | Disable any firewalls or antivirus software that may be blocking port forwarding or multiplayer connections. |
| Update Network Drivers | Ensure that your network drivers are up-to-date. Visit the manufacturer’s website for the latest drivers. |
| Disable IPv6 | In some cases, disabling IPv6 in your network settings can improve connectivity for certain games. |
Restarting the Router and Modem
Restarting your router and modem can resolve various network issues, including problems with Minecraft multiplayer. Follow these steps to restart these devices:
1. Unplug the Router and Modem
Disconnect the power cables from both the router and the modem.
2. Wait for a Few Minutes
Allow the devices to remain unplugged for at least 30 seconds.
3. Plug in the Modem First
Reconnect the power cable to the modem and wait until it fully boots up.
4. Plug in the Router
Once the modem is online, connect the router’s power cable and let it initialize.
5. Wait for Synchronization
Allow a few minutes for the router and modem to establish synchronization.
6. Test Your Connection
Launch Minecraft and check if you can now connect to multiplayer servers.
7. Troubleshooting Tips
If restarting your router and modem does not resolve the issue, consider the following troubleshooting measures:
|
Problem |
Possible Solution |
|---|---|
|
Internet is still not working. |
Contact your Internet service provider (ISP) to check for service interruptions or technical issues. |
|
Minecraft multiplayer still fails to connect. |
Check the Minecraft server status page to ensure the servers are online. Verify the server address and port you are trying to connect to are correct. Disable any firewall or antivirus software that may be blocking the connection. Try connecting to a different server to isolate the issue. |
Forwarding Ports on the Router
For Bedrock Edition multiplayer to work, you need to forward ports on your router. This allows your computer to communicate with other players over the internet. The specific ports you need to forward are:
**TCP:** 19132, 25565
**UDP:** 19132, 25565
To forward these ports, you need to access your router’s settings. The steps to do this vary depending on your router model, but here are the general steps:
- Open a web browser and type your router’s IP address into the address bar. This is usually something like 192.168.1.1 or 192.168.0.1.
- Enter your router’s username and password. These are usually printed on a label on the bottom of the router.
- Find the section of the router’s settings that allows you to forward ports. This is usually called "Port Forwarding" or "Virtual Servers".
- Create a new port forwarding rule for each of the ports listed above. The following table shows the settings you need to use for each rule:
| Port | Protocol | Action | Destination |
|---|---|---|---|
| 19132 | TCP | Forward | Your computer’s IP address |
| 19132 | UDP | Forward | Your computer’s IP address |
| 25565 | TCP | Forward | Your computer’s IP address |
| 25565 | UDP | Forward | Your computer’s IP address |
Once you have created the port forwarding rules, save your changes and restart your router. You should now be able to connect to multiplayer servers in Bedrock Edition.
Updating Network Drivers
Outdated network drivers can cause a wide range of connectivity issues, including problems connecting to multiplayer servers in Bedrock Edition. To ensure your network drivers are up-to-date:
1. Identify Your Network Adapter
Determine your computer’s network adapter through Device Manager. Access Device Manager by searching for it in the Windows search bar or right-clicking on the Start button.
2. Locate Your Driver
In Device Manager, expand the Network Adapters section. Locate your network adapter and right-click on it.
3. Update the Driver Automatically
Select “Update driver” from the context menu and choose “Search automatically for updated driver software.” Windows will automatically search for and install any available driver updates.
4. Update Manually
If Windows fails to find an updated driver, you can manually download and install the latest driver from the manufacturer’s website.
5. Restart Your Computer
Once the driver update is complete, restart your computer to apply the changes.
6. Check for Windows Updates
Windows updates can sometimes include updated network drivers. Navigate to Windows Settings, select “Update & Security,” and click on “Check for updates.”
7. Reinstall the Driver
If updating the driver does not resolve the issue, try reinstalling it completely. Uninstall the network adapter from Device Manager and restart your computer. Windows will automatically reinstall the driver.
8. Contact Your Manufacturer
If none of the above steps resolve the issue, contact your network adapter manufacturer for additional support.
9. Advanced Troubleshooting
If you are experiencing particularly persistent issues, you can try the following advanced troubleshooting steps:
a. Disable Windows Firewall
Temporarily disable your Windows firewall to eliminate it as a potential cause of the connection problem.
b. Flush DNS Cache
To flush your DNS cache, open a command prompt as an administrator and type the following command: ipconfig /flushdns
c. Reset Network Settings
Resetting network settings will revert all network configurations to their default values. Navigate to Windows Settings, select “Network & Internet,” and click on “Network reset.” This may require you to reconfigure your network connections.
Contacting Mojang Support
If you have tried all the above solutions and still cannot get multiplayer working, you can contact Mojang support for help. Here is how to do it:
1. Gather your information
Before you contact Mojang support, it is helpful to gather some information that will help them troubleshoot your issue. This includes:
- Your Minecraft username
- The version of Minecraft Bedrock you are using
- The platform you are playing on (Xbox, PlayStation, Nintendo Switch, Windows 10, etc.)
- A description of the problem you are experiencing
- Any error messages you have received
2. Create a support ticket
Once you have gathered your information, you can create a support ticket on the Mojang support website. To do this, follow these steps:
| Step | Action |
|---|---|
| 1 | Go to the Mojang support website: https://help.minecraft.net/hc/en-us |
| 2 | Click on the “Create a support ticket” button |
| 3 | Fill out the form with your information and the details of your issue |
| 4 | Click on the “Submit” button |
Once you have submitted your ticket, a Mojang support representative will review it and get back to you as soon as possible.
How To Fix Bedrock No Multiplayer
Bedrock is a solid block that forms the base of the world in Minecraft. It is also the name of the version of Minecraft that is available on Windows 10, Xbox One, PlayStation 4, Nintendo Switch, and mobile devices. Bedrock Edition is different from Java Edition in a number of ways, including the way that multiplayer works.
In Java Edition, players can join multiplayer servers by entering the server’s IP address. In Bedrock Edition, players can only join multiplayer servers that are hosted by their friends or by Microsoft.
If you are having trouble joining a multiplayer server in Bedrock Edition, there are a few things you can try:
- Make sure that you are connected to the internet.
- Make sure that the server is online and that you have the correct IP address.
- Make sure that your firewall is not blocking the connection to the server.
- Try restarting your game.
- If you are still having trouble, you can try contacting the server owner for help.
People Also Ask
Why can’t I join multiplayer on Minecraft Bedrock Edition?
There are a few reasons why you might not be able to join multiplayer on Minecraft Bedrock Edition:
- You are not connected to the internet.
- The server is offline or you have the wrong IP address.
- Your firewall is blocking the connection to the server.
- Your game is not up to date.
- You are trying to join a server that is not compatible with your version of the game.
How do I fix “Unable to connect to world” in Minecraft Bedrock Edition?
There are a few things you can try to fix “Unable to connect to world” in Minecraft Bedrock Edition:
- Make sure that you are connected to the internet.
- Make sure that the server is online and that you have the correct IP address.
- Make sure that your firewall is not blocking the connection to the server.
- Try restarting your game.
- If you are still having trouble, you can try contacting the server owner for help.
How do I join a friend’s world in Minecraft Bedrock Edition?
To join a friend’s world in Minecraft Bedrock Edition, you need to:
- Open Minecraft Bedrock Edition.
- Click on the “Play” button.
- Click on the “Friends” tab.
- Select your friend’s world and click on the “Join” button.
