Whether you’re dealing with a leaky handle or simply want to update the look of your bathroom, removing a Delta shower handle is a relatively simple DIY project. With a few basic tools and a bit of patience, you can have the job done in no time. Here’s a step-by-step guide to help you through the process.
Before you begin, gather your tools. You will need a Phillips head screwdriver, an Allen wrench, and a pair of pliers. If your shower handle has a set screw, you will also need a small Allen wrench to remove it. Once you have your tools, you are ready to start the removal process.
Begin by turning off the water supply to your shower. This is typically done by turning the valve located behind the shower handle. Once the water is turned off, remove the cap on the handle. You should now see a screw or bolt in the center of the handle. Using the appropriate screwdriver or Allen wrench, remove the screw or bolt. Once the screw or bolt is removed, you should be able to pull the handle off of the valve stem. If the handle is stuck, you can use the pliers to gently pry it off.
Accessing the Cartridge
The cartridge is the heart of the Delta shower handle, and it’s what controls the flow of water. Before you can replace the handle, you’ll need to remove the cartridge. Here’s how to do it:
1. **Turn off the water supply to the shower.** This is usually done by turning the valves located behind the showerhead.
2. **Remove the handle.** Use a screwdriver to loosen the screw that secures the handle to the shower stem. Once the screw is loose, you can pull the handle off the stem.
3. **Remove the trim plate.** The trim plate is the decorative cover that surrounds the shower handle. Use a screwdriver to remove the screws that secure the trim plate to the shower wall. Once the screws are removed, you can pull the trim plate off the wall.
4. **Remove the cartridge.** The cartridge is held in place by a clip or retaining ring.
For cartridges held by a clip:
- Locate the clip on the side of the cartridge.
- Use a screwdriver to pry the clip open.
- Once the clip is open, you can pull the cartridge straight out of the shower body.
For cartridges held by a retaining ring:
- Use a pair of pliers to loosen the retaining ring.
- Once the retaining ring is loose, you can pull the cartridge straight out of the shower body.
How To Remove Delta Shower Handle
To remove a Delta shower handle, you will need a few tools: a flathead screwdriver, a Phillips head screwdriver, and an Allen wrench. Start by turning off the water supply to the shower. Then, use the flathead screwdriver to pry off the cap on the handle. Next, use the Phillips head screwdriver to remove the screws that are holding the handle in place. Finally, use the Allen wrench to loosen the set screw that is located in the center of the handle. Once the set screw is loose, you can pull the handle straight off of the stem.
Here are some additional tips for removing a Delta shower handle:
- If the handle is stuck, you can try using penetrating oil to loosen it up.
- Be careful not to strip the screws when you are removing them.
- If you are having trouble removing the handle, you can call a plumber for assistance.
People Also Ask About How To Remove Delta Shower Handle
How do I remove a Delta shower knob?
To remove a Delta shower knob, you will need a flathead screwdriver and an Allen wrench. Start by turning off the water supply to the shower. Then, use the flathead screwdriver to pry off the cap on the knob. Next, use the Allen wrench to loosen the set screw that is located in the center of the knob. Once the set screw is loose, you can pull the knob straight off of the stem.
How do I replace a Delta shower handle?
To replace a Delta shower handle, you will need a new handle, a flathead screwdriver, a Phillips head screwdriver, and an Allen wrench. Start by turning off the water supply to the shower. Then, use the flathead screwdriver to pry off the cap on the old handle. Next, use the Phillips head screwdriver to remove the screws that are holding the handle in place. Finally, use the Allen wrench to loosen the set screw that is located in the center of the handle. Once the set screw is loose, you can pull the old handle straight off of the stem.
To install the new handle, simply reverse the steps above. First, insert the new handle onto the stem. Then, tighten the set screw using the Allen wrench. Next, screw in the screws that are holding the handle in place using the Phillips head screwdriver. Finally, replace the cap on the handle using the flathead screwdriver.
How do I fix a leaking Delta shower handle?
To fix a leaking Delta shower handle, you will need a new washer. Start by turning off the water supply to the shower. Then, use a flathead screwdriver to pry off the cap on the handle. Next, use the Phillips head screwdriver to remove the screws that are holding the handle in place. Finally, use the Allen wrench to loosen the set screw that is located in the center of the handle. Once the set screw is loose, you can pull the handle straight off of the stem.
To replace the washer, simply remove the old washer from the handle and replace it with a new one. Then, reassemble the handle by reversing the steps above.
