Are you tired of your Converse shoelaces coming undone at the worst possible moments? Have you ever found yourself fumbling with them in front of your friends or colleagues, feeling embarrassed and frustrated? If so, then it’s time to learn the art of tying Converse shoelaces the right way – a method that will ensure they stay securely fastened all day long.
The traditional method of tying shoelaces, known as the “square knot,” is often not strong enough to withstand the constant movement and wear and tear that Converse shoes experience. However, there is a modified version of this knot, called the “surgeon’s knot,” which is much more secure and reliable. This knot is popular among surgeons and other medical professionals who need their shoelaces to stay tied securely even in high-stress situations.
To tie the surgeon’s knot, start by making a simple overhand knot, as you would with the traditional method. Then, take the left-hand loop and pass it through the right-hand loop from back to front. Next, take the right-hand loop and pass it through the left-hand loop from front to back. Finally, pull both ends of the lace to tighten the knot, and you’re done! This method creates a more secure knot that is less likely to come undone, even with repeated use.
The Basic Lace-Up Method
Step 1: Thread the Laces
Begin by threading one end of each lace through the bottom eyelets on the outside of each shoe. Pull the laces through until there is an equal length of lace on both sides.
Cross and Thread
- Cross the right lace over the left and thread it under the second eyelet on the left side of the shoe.
- Bring the right lace back over the left lace and thread it under the second eyelet on the right side of the shoe.
- Continue alternating crossing and threading the laces, moving up the eyelets.
Tighten and Tie
- When you reach the top eyelets, pull both laces tight to secure the knots.
- Tie the laces with a double knot or a bow, depending on your preference.
Lace-Through Method
An alternative method to the basic lace-up is the lace-through method. In this method, the laces are threaded through the eyelets from the inside out, resulting in a cleaner look.
To perform the lace-through method, follow these steps:
- Thread the laces through the bottom eyelets from the inside of the shoe.
- Cross the right lace over the left and thread it through the second eyelet on the right side, from the inside out.
- Bring the right lace back over the left lace and thread it through the second eyelet on the left side, from the inside out.
- Continue alternating crossing and threading the laces, moving up the eyelets from the inside out.
- Tighten and tie the laces as described in the basic lace-up method.
The Alternating Cross-Lace Method
This method is the most common way to lace your Converse shoes. It’s simple and easy to do, and it creates a secure, comfortable fit.
Step 1: Start at the bottom.
Thread the left lace through the bottom eyelet on the left side of the shoe, and the right lace through the bottom eyelet on the right side of the shoe.
Step 2: Cross the laces.
Bring the left lace over the right lace and through the second eyelet on the right side of the shoe. Then bring the right lace over the left lace and through the second eyelet on the left side of the shoe.
Step 3: Continue crossing the laces.
Continue crossing the laces over each other, working your way up the shoe. Alternate which lace goes over the other as you go.
Step 4: Tie the laces.
When you reach the top of the shoe, tie the laces together in a bow or a knot.
| Step | Description |
|---|---|
| 1 | Thread the left lace through the bottom eyelet on the left side of the shoe, and the right lace through the bottom eyelet on the right side of the shoe. |
| 2 | Bring the left lace over the right lace and through the second eyelet on the right side of the shoe. Then bring the right lace over the left lace and through the second eyelet on the left side of the shoe. |
| 3 | Continue crossing the laces over each other, working your way up the shoe. Alternate which lace goes over the other as you go. |
| 4 | When you reach the top of the shoe, tie the laces together in a bow or a knot. |
The Star Lacing Technique
The Star Lacing Technique is a unique and stylish way to lace your Converse shoes, giving them a distinct look. This technique is not only visually appealing but also provides a snug fit, ensuring a comfortable and secure wear.
Step-by-Step Instructions:
-
Thread the laces through the bottom eyelets: Start by threading the laces through the two bottom eyelets on either side of the shoe. Ensure the laces are even in length.
-
Criss-cross the laces: Cross the left lace over the right lace and thread it through the second eyelet from the bottom on the right side. Repeat the process on the left side, crossing the right lace over the left lace and threading it through the second eyelet from the bottom on the left side.
-
Form the star pattern: Here’s where the technique gets its name. Take the right lace and thread it through the third eyelet from the bottom on the left side. Then, take the left lace and thread it through the third eyelet from the bottom on the right side. This creates a star shape in the center of the shoe.
-
Continue the pattern: Repeat steps 3-4 until you reach the top eyelets. Each time, thread the right lace through the eyelet on the opposite side and the left lace through the eyelet on the same side. This will create a series of intersecting stars along the shoe.
-
Tie the laces: Once you have reached the top eyelets, tie the laces as usual. You can use a double knot or a bow to secure the laces.
The Star Lacing Technique is a great way to add a touch of flair to your Converse shoes and personalize your footwear. It’s easy to learn and provides a comfortable and secure fit.
The Crisscross Lacing Method
The crisscross lacing method is a classic and versatile lacing technique that can be used on almost any type of shoe, including Converse. Here’s how to do it:
1. Insert the laces into the bottom two eyelets
Start by inserting the laces into the bottom two eyelets on one side of the shoe. Make sure the laces are evenly crossed.
2. Cross the laces over each other
Cross the right lace over the left lace and then insert it into the third eyelet on the opposite side of the shoe. Cross the left lace over the right lace and insert it into the third eyelet on the same side of the shoe.
3. Continue crisscrossing the laces
Continue crisscrossing the laces up the shoe, alternating sides with each cross. When you reach the top two eyelets, lace the laces into them in a straight line.
4. Tighten the laces
To tighten the laces, pull on both ends of the laces at the same time. You can also use a lace-tightening tool to get a more secure fit. Here are some additional tips for tightening the laces:
5. Tie the laces
Once the laces are tight, tie them in a bow or square knot. Make sure the knot is secure so that the laces don’t come undone.
The Ladder Lacing Style
The ladder lacing style is an intricate and stylish way to lace your Converse shoes. It creates a unique and eye-catching pattern that is sure to turn heads. Here are the steps on how to tie your Converse shoes using the ladder lacing style:
Steps:
1. Start by threading the laces through the bottom two eyelets on one side of the shoe.
2. Cross the laces over each other and thread them through the next two eyelets on the other side of the shoe.
3. Repeat steps 1 and 2 until you reach the top of the shoe.
4. When you get to the top of the shoe, lace the laces through one of the eyelets and then bring them across to the other side of the shoe.
5. Thread the laces through the remaining eyelets, alternating between the two sides of the shoe. To create the ladder effect, bring the lace back down and through the corresponding eyelet of the opposite side. Repeat this process until you reach the top.
Additional Tips:
* If you want a tighter fit, pull the laces more tightly when you thread them through the eyelets.
* If you want a looser fit, leave some slack in the laces when you thread them through the eyelets.
* You can experiment with different colors of laces to create a unique look.
* The ladder lacing style can be used on any type of Converse shoe, including high-tops, low-tops, and slip-ons.
The Straight Lacing Option
This method is the most basic and straightforward way to lace your Converse shoes. It creates a simple, clean look that is suitable for both casual and formal occasions. To straightlace your Converse, follow these steps:
- Insert the left lace through the bottom left eyelet and pull it up, leaving about 6 inches of lace on the outside of the shoe.
- Insert the right lace through the bottom right eyelet and pull it up, leaving about 6 inches of lace on the outside of the shoe.
- Cross the left lace over the right lace and insert it through the next eyelet up on the right side.
- Cross the right lace over the left lace and insert it through the next eyelet up on the left side.
- Repeat steps 3-4 until you reach the top of the shoe.
- Now you will have two sets of laces on the outside of the shoe. Take one lace from each set and tie them together about 1 inch from the top of the shoe.
Variation: Double Cross Straight Lacing
This variation on straight lacing adds a bit of style to your Converse. The double cross creates a diamond pattern on the front of the shoe that is both visually appealing and secure.
- Follow the steps for straight lacing up to step 5.
- Instead of inserting the right lace through the next eyelet up on the left side, cross it over the left lace again and insert it through the second eyelet up on the left side.
- Repeat step 6 with the left lace, crossing it over the right lace and inserting it through the second eyelet up on the right side.
- Continue alternating the double cross pattern until you reach the top of the shoe.
The Bunny Ear Lacing System
For a fun and stylish lace-up look, try the Bunny Ear Lacing System. This method creates adorable bunny ears on your Converse, adding a touch of whimsy to your footwear.
Step 1: Thread the Lace
Start by threading the lace through the bottom two lace holes of each shoe, from the outside towards the inside.
Step 2: Create the Bunny Ears
After threading the lace through both shoes, form a loop on each side. Pull the laces tight and cross them over, creating two bunny ears.
Step 3: Bunny Ears Cross and Tightening
Bring the left bunny ear over the right and insert it into the bottom right lace hole. Then, bring the right bunny ear over the left and insert it into the bottom left lace hole.
Step 4: Straighten the Bunny Ears
Pull both bunny ears snugly to straighten them. Ensure they are even in length and angled at a slight downward slant.
Step 5: Cross and Cross Again
Cross the bunny ears once more, bringing the left over the right. Then, repeat the cross, bringing the right over the left.
Step 6: Thread and Tighten
Thread the bunny ears through the next pair of lace holes, one bunny ear through each hole. Pull the laces tight to secure the ears.
Step 7: Final Bunny Ear Formation
To complete the look, create another pair of bunny ears by following steps 2-6. Once finished, gently tug on the bunny ears to ensure they are evenly shaped and securely in place.
The Over-Under Lace-Up Method
Step 1: Cross the laces
Lay out the laces flat and cross the right lace over the left.
Step 2: Bring the right lace under
Bring the right lace under and through the loop created by the left lace.
Step 3: Bring the left lace over
Bring the left lace over and through the loop created by the right lace.
Step 4: Tighten the laces
Pull both laces simultaneously to tighten them.
Step 5: Repeat steps 2-4
Repeat steps 2-4 until you reach the desired tightness.
Step 6: Create a bunny ear loop
Bring the right lace up and over the left lace to create a loop that resembles a bunny ear.
Step 7: Wrap the left lace
Wrap the left lace around the bunny ear loop you’ve just created.
Step 8: Pull the laces through the holes
Now comes the intricate part involving the “weird, complicated knot.” Here are the detailed steps:
1. Insert the right lace through the hole directly below the bunny ear loop.
2. Bring it back through the same hole, but from under.
3. Cross the left lace over the right and insert it into the hole above the bunny ear loop.
4. Bring it back through the same hole, again from under.
5. Pull both laces simultaneously to tighten the knot.
Step 9: Repeat steps 6-8 for the other side
Repeat steps 6-8 on the other side of the shoe to create a matching bunny ear loop and secure the laces.
Step 10: Trim the excess
Once you’ve finished, trim any excess lace that may be dangling.
The Square Lacing Pattern
The square lacing pattern is a classic and versatile lacing method that creates a neat and symmetrical look. It is also one of the most secure lacing methods, making it a good choice for high-impact activities.
Here are the steps on how to tie Converse shoelaces using the square lacing pattern:
1. Start by threading the lace through the bottom two eyelets on one side of the shoe.
2. Cross the laces over each other and thread them through the next two eyelets up.
3. Repeat steps 1 and 2 until you reach the top of the shoe. The number of crossings will determine the number of squares in the lacing pattern. The example below uses 9 crossings for a 10-eyelet shoe.
4. Once you reach the top of the shoe, thread the laces through the last two eyelets and pull them tight.
5. Tie the laces off with a knot or bow.
| Crossing Number | Description |
|---|---|
| 1 | Cross the laces over each other and thread them through the next two eyelets up. |
| 2 | Cross the laces over each other and thread them through the next two eyelets up. |
| 3 | Cross the laces over each other and thread them through the next two eyelets up. |
| 4 | Cross the laces over each other and thread them through the next two eyelets up. |
| 5 | Cross the laces over each other and thread them through the next two eyelets up. |
| 6 | Cross the laces over each other and thread them through the next two eyelets up. |
| 7 | Cross the laces over each other and thread them through the next two eyelets up. |
| 8 | Cross the laces over each other and thread them through the next two eyelets up. |
| 9 | Cross the laces over each other and thread them through the next two eyelets up, creating a square shape. |
The Zigzag Lacing Technique
This classic lacing technique provides a secure and comfortable fit that’s perfect for everyday wear. Here’s how to do it step by step:
1. Cross the left lace over the right lace and insert it into the second hole on the right.
2. Pull the right lace up and through the second hole on the left.
3. Repeat steps 1 and 2 until you reach the top of the shoe.
4. Lace the top hole on the left, alternating between the left and right holes.
5. Cross the right lace over the left lace and lace the second hole from the top on the left.
6. Cross the left lace over the right lace and lace the hole on the right side.
7. Repeat steps 5 and 6 until you reach the bottom of the shoe.
8. Lace the bottom hole on the left, alternating between the left and right holes.
9. Cross the right lace over the left lace and insert it into the second hole from the bottom on the right.
10. Pull the left lace up and through the second hole from the bottom on the left. At this point, you will have created a zigzag pattern on the inside of the shoe. Repeat this process for the remaining holes, alternating the laces each time to form a crisscross pattern on the outside of the shoe. This provides extra support and keeps the laces from slipping loose.
How To Tie Converse Shoelaces
Tying Converse shoelaces is a simple task that can be mastered in a few easy steps. The most common method is the “straight lacing” technique, which creates a secure and comfortable fit. To tie your Converse shoelaces using this method, follow these steps:
- Cross the left lace over the right lace and bring it up through the bottom eyelet on the right side.
- Cross the right lace over the left lace and bring it up through the bottom eyelet on the left side.
- Repeat steps 1 and 2 until you reach the top of the laces.
- Tie the laces together in a square knot by crossing the left lace over the right lace and then bringing the right lace up through the loop on the left.
- Tighten the knot by pulling on both laces at the same time.
People Also Ask About How To Tie Converse Shoelaces
How do I tie Converse shoelaces with a knot that won’t come undone?
Answer:
To tie your Converse shoelaces with a knot that won’t come undone, you can use a surgeon’s knot. This knot is very secure and is often used in medical settings. To tie a surgeon’s knot, follow these steps:
- Cross the left lace over the right lace and bring it up through the bottom eyelet on the right side.
- Cross the right lace over the left lace and bring it up through the loop on the right side.
- Tighten the knot by pulling on both laces at the same time.
- Cross the left lace over the right lace again and bring it up through the loop on the left side.
- Cross the right lace over the left lace and bring it up through the loop on the right side.
- Tighten the knot again by pulling on both laces at the same time.
How do I tie Converse shoelaces with a decorative knot?
Answer:
There are many different ways to tie your Converse shoelaces with a decorative knot. One popular method is the “bunny ear” knot. To tie a bunny ear knot, follow these steps:
- Cross the left lace over the right lace and bring it up through the bottom eyelet on the right side.
- Cross the right lace over the left lace and bring it up through the loop on the right side.
- Create a small loop with the left lace and bring it up through the loop on the right side.
- Create another small loop with the right lace and bring it up through the loop on the left side.
- Tighten the knot by pulling on both laces at the same time.
